Somthing like this
this one was factory
It is pretty easy 2 screws on the body and 4 on the tail
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Bigsby On A Les Paul http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5502 |
Page 1 of 1 |
| Author: | bolf7265 [ Tue Mar 07, 2006 6:44 am ] |
| Post subject: | |
I'm thinking about adding a Bigsby to my LP Custom, but don't know much about the Bigsby models or the installation. Can an expert enlighten me as to which model(s) can be used and what are the side effects (visual holes, etc.) with installing the Bigsby? Thanks. |
|
| Author: | Michael Dale Payne [ Tue Mar 07, 2006 7:50 am ] |
| Post subject: | |
Somthing like this
this one was factory It is pretty easy 2 screws on the body and 4 on the tail |
|
| Author: | ecklesweb [ Tue Mar 07, 2006 8:00 am ] |
| Post subject: | |
One of the Bigsby models (B3 maybe?) mounts via the strap button, so there's no holes to drill, and nothing to repair if you later remove it and go back to a traditional TOM-stopbar setup. Sooner or later I'm going to build a copy of a Gretsch Jet w/ a Bigsby tremelo. Jay |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|